Ecran bleu again and again :(

Le matériel conseillé, compatibilité, problèmes, périphériques.
Répondre
Snakiss
Messages : 6
Enregistré le : mar. 1 avr. 2014 18:19
Etes vous un robot ? : Non

Ecran bleu again and again :(

Message par Snakiss »

Bonjour, je viens vous demandez en aide pour des problèmes d'écran bleus.
Je suis sous windows 7 sur PC fixe.
J'ai déjà tester chaque barette de RAM sur chaque slot.
Voici le rapport Whocrashed.

Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Wed 18/06/2014 11:35:32 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88004E4BA78, 0xFFFFF88004CBBE70, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Tue 17/06/2014 18:17:02 GMT your computer crashed
crash dump file: C:\Windows\Minidump\061714-19281-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x109 (0xA3A039D896471507, 0x0, 0x7D816191E61E24C7, 0x101)
Error: CRITICAL_STRUCTURE_CORRUPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that the kernel has detected critical kernel code or data corruption.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Tue 17/06/2014 17:06:45 GMT your computer crashed
crash dump file: C:\Windows\Minidump\061714-19609-01.dmp
This was probably caused by the following module: usbport.sys (USBPORT+0x2D2F1)
Bugcheck code: 0xFE (0x6, 0xFFFFFA8005EFFD20, 0x50456368, 0x0)
Error: BUGCODE_USB_DRIVER
file path: C:\Windows\system32\drivers\usbport.sys
product: Système d’exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote de port USB 1.1 & 2.0
Bug check description: This indicates that an error has occurred in a Universal Serial Bus (USB) driver.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


On Tue 17/06/2014 17:01:28 GMT your computer crashed
crash dump file: C:\Windows\Minidump\061714-19141-01.dmp
This was probably caused by the following module: wg111v3.sys (wg111v3+0x73A0C)
Bugcheck code: 0xFC (0xFFFFF88004BF9A0C, 0x80000001387E3121, 0xFFFFF8000448B350, 0x0)
Error: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
file path: C:\Windows\system32\drivers\wg111v3.sys
product: NETGEAR WG111v3 Wireless-G USB Adapter NDIS Driver
company: NETGEAR Inc.
description: NETGEAR WG111v3 Wireless-G USB Adapter NDIS Driver
Bug check description: This indicates that an attempt was made to execute non-executable memory.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. There is a possibility this problem was caused by a virus or other malware.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: wg111v3.sys (NETGEAR WG111v3 Wireless-G USB Adapter NDIS Driver, NETGEAR Inc. ).
Google query: wg111v3.sys NETGEAR Inc. ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY





--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------

4 crash dumps have been found and analyzed. A third party driver has been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:

wg111v3.sys (NETGEAR WG111v3 Wireless-G USB Adapter NDIS Driver, NETGEAR Inc. )

If no updates for these drivers are available, try searching with Google on the names of these drivers in combination the errors that have been reported for these drivers and include the brand and model name of your computer as well in the query. This often yields interesting results from discussions from users who have been experiencing similar problems.


Read the topic general suggestions for troubleshooting system crashes for more information.

Note that it's not always possible to state with certainty whether a reported driver is actually responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.


Merci d'avance !
grimpeur

Re: Ecran bleu again and again :(

Message par grimpeur »

Bonjour,

Le problème n'est pas au niveau des barrettes mais de ton usb NETGEAR .

BUGCODE_USB_DRIVER Pilote de port USB 1.1 & 2.0
NETGEAR WG111v3 Wireless-G USB Adapter NDIS Driver
wg111v3.sys NETGEAR Inc. ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY

Il faut mettre le pilote à jour ;).

:coucou:
Avatar du membre
mwonex
Messages : 3324
Enregistré le : ven. 11 févr. 2011 20:01
Etes vous un robot ? : Non
Localisation : R.P. France 92

Re: Ecran bleu again and again :(

Message par mwonex »

Bonjour,

Rien n'est sur évidemment dans ce genre de cas, des "events" il y en a beaucoup liés aux pilotes ou même à la mémoire.

N'empêche qu'il est fortement recommandé par "crash report"
Click on the links below to search with Google for updates for these drivers:

wg111v3.sys (NETGEAR WG111v3 Wireless-G USB Adapter NDIS Driver, NETGEAR Inc. )
de mettre à jour des pilotes NETGEAR, et ou adaptateur sans fil NDIS ETC.

voir donc sur NETGEAR exemple:
http://firmware.netgear-forum.com/index ... it=WG111v3
http://support.netgear.fr/product/WG111v3
normalement tu dois avoir un "C:\WINDOWS\system32\DRIVERS\wg111v3.sys [2007-12-28 287232] qui date donc de 2007, ce n'est qu'une indication.

En tous cas voilà la direction possible, sauf avis complémentaire, car je ne suis pas plus spécialiste que ça, il y en a d'autres, y compris pour un risque d'infection :hein: on ne sait jamais.

Cordialement :coucou:
Windows 10 Version 20H2 (vers. système 19042.662)
« Mieulx est de ris que de larmes escrire, Pour ce que rire est le propre de l'homme. »
F. Rabelais.
« Nous ne sommes pas ce que nous savons mais ce que nous sommes prêts à apprendre »
M.C. Bateson
Avatar du membre
mwonex
Messages : 3324
Enregistré le : ven. 11 févr. 2011 20:01
Etes vous un robot ? : Non
Localisation : R.P. France 92

Re: Ecran bleu again and again :(

Message par mwonex »

Ca y est Grimpeur m'a devancé, il a raison, mais je m'étend trop ;) :lol: :roll: :!:
je quitte à +
Windows 10 Version 20H2 (vers. système 19042.662)
« Mieulx est de ris que de larmes escrire, Pour ce que rire est le propre de l'homme. »
F. Rabelais.
« Nous ne sommes pas ce que nous savons mais ce que nous sommes prêts à apprendre »
M.C. Bateson
Snakiss
Messages : 6
Enregistré le : mar. 1 avr. 2014 18:19
Etes vous un robot ? : Non

Re: Ecran bleu again and again :(

Message par Snakiss »

Merci à vous deux je vais mettre à jour le driver et vous tenir au courant.
Sinon précédemment j'ai eu 2 nouveau crash qui traitent d'un usbport et un autre bizarre voici le report.

On Wed 18/06/2014 18:25:23 GMT your computer crashed
crash dump file: C:\Windows\Minidump\061814-19312-01.dmp
This was probably caused by the following module: usbport.sys (USBPORT+0x13DD4)
Bugcheck code: 0xD1 (0xBF9198BF, 0x2, 0x1, 0xFFFFF880040B8DD4)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\usbport.sys
product: Système d’exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote de port USB 1.1 & 2.0
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


On Wed 18/06/2014 18:25:23 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: usbport.sys (USBPORT+0x13DD4)
Bugcheck code: 0xD1 (0xBF9198BF, 0x2, 0x1, 0xFFFFF880040B8DD4)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\usbport.sys
product: Système d’exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote de port USB 1.1 & 2.0
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


On Wed 18/06/2014 14:12:50 GMT your computer crashed
crash dump file: C:\Windows\Minidump\061814-27580-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x3B (0xC0000096, 0xFFFFF80002EC5E57, 0xFFFFF88005F1FF20, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
Avatar du membre
mwonex
Messages : 3324
Enregistré le : ven. 11 févr. 2011 20:01
Etes vous un robot ? : Non
Localisation : R.P. France 92

Re: Ecran bleu again and again :(

Message par mwonex »

Bonjour,

Il y aurait aussi un problème lié à un pilote USB:
Description: USB 1.1 & 2.0 Port Driver
contrôle de Bug description: Ceci indique qu'un pilote en mode noyau a tenté d'accéder à la mémoire paginable à un IRQL processus qui était trop élevé.
Cela semble être un bug de pilote logiciel typique et n'est pas susceptible d'être causé par un problème matériel.
L'accident a eu lieu dans un module standard Microsoft. Configuration de votre système peut être incorrect. Peut-être ce problème est causé par un autre pilote sur votre système qui ne peut être identifié à ce moment.
on attend d'autres avis, car un pilotes ..en cache peut-être un autre ;)
:coucou:
Windows 10 Version 20H2 (vers. système 19042.662)
« Mieulx est de ris que de larmes escrire, Pour ce que rire est le propre de l'homme. »
F. Rabelais.
« Nous ne sommes pas ce que nous savons mais ce que nous sommes prêts à apprendre »
M.C. Bateson
Snakiss
Messages : 6
Enregistré le : mar. 1 avr. 2014 18:19
Etes vous un robot ? : Non

Re: Ecran bleu again and again :(

Message par Snakiss »

J'ai mis à jour mon NETGEAR comme vous me l'avaient conseillé mais toujours des crash mais bizarrement ils ne s'affichent pas dans l'analyse de Whocrashed.
Des fois ce sont des écrans figer ou direct le redémarrage du PC.
Et pour les pilotes USB je les mis à jour où ?
Merci d'avance de vos réponses.
grimpeur

Re: Ecran bleu again and again :(

Message par grimpeur »

Bonjour,
Snakiss a écrit :Des fois ce sont des écrans figer ou direct le redémarrage du PC.
Et pour les pilotes USB je les mets à jour où ?
Merci d'avance de vos réponses.
Regarde sur le site du constructeur de ton pc en premier pour savoir si il y a de nouveaux pilotes.
Sinon, faire une détection ici -> http://www.touslesdrivers.com/index.php?v_page=29 à l'aide de ce tuto -> topic14356.html (il y a peut-être quelques changements sur le site par rapport au tuto mais tu devrais t'en sortir).
Snakiss
Messages : 6
Enregistré le : mar. 1 avr. 2014 18:19
Etes vous un robot ? : Non

Re: Ecran bleu again and again :(

Message par Snakiss »

J'ai suivie le tuto et j'ai mis à jour tous sauf l'audio.
J'ai eu un crash tous à l'heure et celui là c'est afficher sur whocrashed :

On Thu 19/06/2014 17:14:51 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: Unknown ()
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF960000F9375, 0x0, 0x1BB)
Error: KMODE_EXCEPTION_NOT_HANDLED
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: Unknown .
Google query: Unknown KMODE_EXCEPTION_NOT_HANDLED

Un nouveau bugcheck code sauriez vous peut être de quoi il s'agit ?
Merci d'avance !
grimpeur

Re: Ecran bleu again and again :(

Message par grimpeur »

Bonsoir,

Débranche tout ce qui est connecté au pc en Usb et redémarre pour voir.

Pour l'erreur -> Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED en lecture.

Tu dois avoir un pilote qui met le bazard dans ton pc ou Pilote de périphérique défectueux ou service système. De plus, un pilote de périphérique défectueux ou d'un service de système pourrait être responsable de cette erreur. Les problèmes matériels, tels que les incompatibilités du BIOS, les conflits de mémoire, et les conflits d'IRQ peuvent également générer cette erreur.

Si le problème est récent et que tu disposes d'un point de restauration, restaure ton pc à une date antérieur.
Répondre