Blue Screen "driver power state failure" BCCode 9f

[Raau]

Bonjour,

Depuis quelques temps il m'arrive frequement (environ une fois par jour) d'avoir un écran bleu sur mon ordinateur, affichant "driver power state failure".
J'ai installé Whocrashed et lancé une analyse et voici le rapport:



Crash Dump Analysis

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Sun 16/12/2012 10:13:43 GMT your computer crashed
crash dump file: C:\Windows\Minidump\121612-23821-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7EFC0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80089F8A10, 0xFFFFF80000BA2748, 0xFFFFFA8009526C60)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 16/12/2012 10:13:43 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80089F8A10, 0xFFFFF80000BA2748, 0xFFFFFA8009526C60)
Error: DRIVER_POWER_STATE_FAILURE
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



Conclusion

2 crash dumps have been found and analyzed. No offending third party drivers have been found. Consider configuring your system to produce a full memory dump for better analysis.


Merci d'avance pour votre aide!

[nardino]

Bonsoir,

Code 0x0000009f

Logiciel : Erreur STOP Windows
Intitulé : DRIVER_POWER_STATE_FAILURE
Solution
Le problème apparaît souvent lorsque vous quittez Windows ou encore lorsque vous le mettez en veille ou que vous que vous revenez à Windows après une mise en veille. Un périphérique n'est probablement pas compatible avec l'ACPI. Un logiciel antivirus non compatible pourrait aussi être à l'origine de l'erreur. Mettez à jour les pilotes des périphériques.

Voir ici :
http://www.docmemo.com/windows/erreurscodes.php
@+